Waveshare CC Debugger

Référence: 59-04629


Quantité

 

Garanties sécurité

 

Livraison gratuite à partir de 300dt

 

Ouvert tous les jours de 8:30h à 18h

Performance

  • Compatible with the original TI CC Debugger
  • Supported Operating Systems: Windows 2000, Windows xp sp2/sp3, Windows Vista 32bit, Windows 7 32bit
  • Target voltage: 1.2V~3.6V
  • Capable of powering the target board from the debugger
  • Operating temperature: 0℃~85℃

Supported Software

  • IAR Embedded Workbench For C8051
  • SmartRF Flash Programmer
  • SmartRF Studio
  • SmartRF Packet Sniffer
  • PurePath Wireless Configurator

Connects to PC:Computer connection via USB interface

Supported Devices

Programming and debugging the following 8051-based system-on-chips from Texas Instruments:CC1110, CC1111;CC2430, CC2431;CC2510, CC2511;

CC2530, CC2531, CC2533,CC2540, CC2541;CC2543, CC2544, CC2545

Controlling the following transceivers from SmartRF Studio:CC1120, CC1121, CC1125, CC1175;CC1101, CC110L, CC113L, CC115L;CC2520

Configuring the CC85xx devices with PurePath Wireless Configurator:CC8520, CC8521;CC8530, CC8531

LED Status

OFF: The debugger has no power or there is no valid firmware on the debugger.

AMBER (BOTH LEDS ON): The debugger is powered, but there is no valid firmware.

RED LED BLINKING: The Debugger is in Boot Recovery Mode.

RED LED ON: No device detected. This might be due to old firmware on the CC Debugger, or a problem with the hardware connection (make sure the target board is properly powered and connected correctly).

GREEN LED ON: The target device has been properly detected. It is possible to start programming/debugging.

PACKAGE CONTENT:1.CC Debugger × 1 2.USB cable × 1 3.10-pin flat cable × 1



Wiki: www.waveshare.com/wiki/CC_Debugger

59-04629

Références spécifiques

Produits apparentés

16 autres produits dans la même catégorie :